Each time you read a Problem Solving question, don't forget to ask, "Can I use the answer choices to my advantage?"

- Video Course
- Video Course Overview
- General GMAT Strategies - 7 videos (free)
- Data Sufficiency - 16 videos (free)
- Arithmetic - 38 videos
- Powers and Roots - 36 videos
- Algebra and Equation Solving - 73 videos
- Word Problems - 48 videos
- Geometry - 42 videos
- Integer Properties - 38 videos
- Statistics - 20 videos
- Counting - 27 videos
- Probability - 23 videos
- Analytical Writing Assessment - 5 videos (free)
- Reading Comprehension - 10 videos (free)
- Critical Reasoning - 38 videos
- Sentence Correction - 70 videos
- Integrated Reasoning - 17 videos

- Study Guide
- Blog
- Philosophy
- Office Hours
- Extras
- Prices

## Comment on

More Standard Deviation## Hi Brent ,

These videos are great and very helpful. I was faced with same problem m+d one unit above/below the mean and i was able to tackle the question within a min. Thank you so much these videos are straight up to the point.

Thanks again !!!!

## Hi Laxmi,

Hi Laxmi,

Thanks for taking the time to say that!

## Perfect explanation and I

## Hello Brent,

Can you please help me with the below question ?

What is the standard deviation of a set of numbers whose mean is 20?

(1) The absolute value of the difference of each number in the set from the mean is equal

(2) The sum of the squares of the differences from the mean is greater than 100

Since the absolute value of difference of each number from mean is equal, SD must be zero. I selected A as answer.

Thank you,

Srividhya

## Good question.

Good question.

Notice that the sets {-1, 1} and {-500, 500} both have a mean of 0, and the difference of each number in the set from the mean is equal. HOWEVER, the standard deviation in the 2nd set is much greater than the standard deviation in the 1st set

There are some nice solutions here: http://www.beatthegmat.com/what-is-the-standard-deviation-of-a-set-of-nu...

Cheers,

Brent

## Pls help with the following

A certain characteristic in a large population has a distribution that is symmetric about the mean m. If 68 percent of the distribution lies within one standard deviation d of the mean, what percent of the distribution is less than m + d ?

(A) 16%

(B) 32%

(C) 48%

(D) 84%

(E) 92%

## Here's my step-by-step

Here's my step-by-step solution: https://gmatclub.com/forum/a-certain-characteristic-in-a-large-populatio...

Cheers,

Brent

## Brent,

Could you help me with the exercise #392 of OG17.

Thanks,

Pedro

## You bet, Pedro.

You bet, Pedro.

Here's my solution: https://gmatclub.com/forum/beginning-in-january-of-last-year-carl-made-d...

Cheers,

Brent

## Thanks Brent!

Cheers,

Pedro

## Hi Brent, the following

A Bell Curve (Normal Distribution) has a mean of − 1 and a standard deviation of 1/8 . How many integer values are within three standard deviations of the mean?

A. 0

B. 1

C. 3

D. 6

E. 7

## Hi Jalal,

Hi Jalal,

The correct answer is B (1).

Given the above information, the values within 3 standard deviations of the mean are all values from -1 3/8 to -5/8 inclusive.

So, the integer -1 is within this range.

Here's my full solution: https://gmatclub.com/forum/a-bell-curve-normal-distribution-has-a-mean-o...

Cheers,

Brent

## https://gmatclub.com/forum

sir i did this question by testing options 9,10 and 16 since x is mode only these option satisfy is their any other way other than testing values?

## Question link: https:/

Question link: https://gmatclub.com/forum/set-b-has-7-members-and-x-and-y-are-distinct-...

Using the 2 facts (mean = 12 and mode = x), there are only 3 possible cases:

i) x = 9 and y = 15

ii) x = 10 and y = 13

iii) x = 16 and y = 1

To maximize the Standard Deviation, we must find the pair of values that are farthest from the mean (mean = 12)

x = 16 and y = 1 are the farthest from the mean.

So, x = 16 will maximize the Standard Deviation

Here's my full solution: https://gmatclub.com/forum/set-b-has-7-members-and-x-and-y-are-distinct-...

Cheers,

Brent

## https://gmatclub.com/forum/if

please explain .

## Here's my full solution:

Here's my full solution: https://gmatclub.com/forum/if-s-is-a-set-of-four-numbers-x-y-z-and-w-is-...

## https://gmatclub.com/forum

please explain.

## Question link: https:/

Question link: https://gmatclub.com/forum/the-average-arithmetic-mean-of-10-distinct-od...

I'm a HUGE fan of Bunuel's questions on GMAT Club, but this questions requires WAYYYY too much brute force (fiddling with various 10-value sets) for it to be a true GMAT question.

I suggest that you skip this one.

Cheers,

Brent

## https://gmatclub.com/forum/if

please explain.

## Here's my full solution:

Here's my full solution: https://gmatclub.com/forum/if-all-members-of-set-x-are-positive-integers...

Cheers,

Brent

## Hi Brent,

I have a question in general: When (in which scenarios) do we use variance over SD in real world applications and vice versa?

Warm Regards,

Pritish

## Variance and Standard

Variance and Standard Deviation are very closely related.

In fact, √variance = standard deviation

Aside from the question in the Official Guide's diagnostic test, I don't think I've seen an OFFICIAL GMAT question that asks us to find the variance.

The main reason for this is that variance ends up with units of measurement that are DIFFERENT from the original data.

For example, let's say we're examining a set of temperatures in degrees Celsius {10, 20, 30}

The VARIANCE = the average of the sum of the squares of the differences between each value and the mean.

With the set {10, 20, 30}, the mean is 10.

So, the variance = [(10-20)² + (20-20)² + (30-20)²]/3

Let's examine one part: (30-20)²

30 - 20 = 10, tells us that 30 degrees is 10 degrees more than the mean of 20 degrees.

However, when we SQUARE (30-20)² to get 100, the units of measurement are now in degrees², which makes little sense.

However, when we find the standard deviation (by taking the square root of the variance), the unit of measurement is now in degrees (which makes sense)

Does that help?

Cheers,

Brent

## Hi Brent,

Where can I find more content on this sub-topic i.e the correlation between mean and standard deviation when a constant is added to all the values, or multiplied and so on..? I just wanted to see the different permutations and combinations on this particular property to get better acquainted with the concept.

Thanks

## Great question. First I'll

Great question. First I'll explain the two properties you need to know, and then I'll provide a list of reinforcement questions.

For both properties, let's say that k is the standard deviation of set X

PROPERTY #1: If we add n to each value in set X, the standard deviation of the new set = k

PROPERTY #2: If we multiply each value in set X by m, the standard deviation of the new set = mk

Reinforcement questions:

- https://gmatclub.com/forum/if-d-is-the-standard-deviation-x-y-and-z-what...

- https://gmatclub.com/forum/the-students-at-the-woodlands-high-school-sco...

- https://gmatclub.com/forum/the-average-of-a-b-c-and-d-is-5-and-their-sta...

- https://gmatclub.com/forum/a-researcher-computed-the-mean-the-median-and...

- https://gmatclub.com/forum/for-each-student-in-a-certain-class-a-teacher...

- https://gmatclub.com/forum/which-of-the-following-has-the-same-standard-...

Please let me know if you'd like me to find more questions.

## thanks a lot Brent! That was